Home Timeline: View
Today
zdfabric zdfabric added new blog post

Moisture-wicking and quick-drying fabrics are the most common in sportswear. Obviously, this is a functional fabric that is customized for people who love sports. After exercise, it will inevitably release too much sweat, while ordinary pure cotton fabric
10 hours ago 0 likes 0 comments 0 comments
2 days ago
Mayne Nalyia added new blog post

Nike will soon drop another Dunk bomb in the form of this Nike Dunk Low Rooted in Peace. Besides the fact that this sneaker has a very tight camo print, the left and right sneaker also use a different pattern. We have the first on-feet photos in the pocket
2 days ago 0 likes 0 comments 0 comments
3 days ago
wistar motor :
Roller Shutter Tubular Motor Manufacturers Introduces The Installation Knowledge Of Curtain U-shaped Track


Roller Shutter Tubular Motor Manufacturers introduces the installation method of curtain U-shaped track:

1. Draw a line for positioning. Considering the firmness of the fixing and avoiding the excessively large distance between the fixing parts, which cannot withstand the pulling force, first measure the size of the required installation rail, and then calculate... see more the fixing hole distance. Generally, the distance between the fixing parts is not more than 50 cm, and then draw a line to locate. The accuracy of positioning is related to the success or failure of curtain installation.

2. Install the fixing parts. After finding the line, check whether the position, specification, and method of the embedded fixtures of the curtain box can meet the requirements of installation and fixation. Measures should be taken to deal with errors in elevation, flatness, center position, and distance from the wall. Generally, the installation fasteners need to add expansion screws for cement walls or roofs.

3. Check the processed products: check the processed products that have entered the site, and check whether the varieties, specifications, and assembly structures meet the design and installation requirements before installation.

4. Wear pulleys. When the window width is greater than 1200mm, the curtain rail should be disconnected, the simmering bend should be staggered at the disconnection, the simmering bend should be a gentle curve, and the overlap length should not be less than 200mm. When putting pulleys on the track, you must pay attention to the length of the track. The general specification is: 1 meter long track with 7 pulleys, so as to ensure the magnitude and uniformity of the force after the curtain is installed.

5. After the window rail is installed with the pulley, in order to prevent the pulley from rolling out of the track, and also to avoid scratching the front from the sharp corners at both ends of the rail, use sealing plugs at both ends of the window rail to block it. Then fix the seal with screws.

6. Connect the card slot and track of the fixed part. Insert the curtain track with the pulley into the slot of the fixed part, and then place the lifting clip so that the lifting clip of the fixed part is at 90 degrees to the track, and tighten the lifting clip with the screw, so that the lifting clip tightly clamps the curtain track. Through the above steps, basically the curtain track is installed!\

Through the above introduction, Roller Blinds Motor Factory hopes that you can simply refer to the content of this article in future use.

www.wistarmotor.com
3 days ago 0 likes 0 comments 0 comments
huzhou fuji :
China Elevator Lifts Factory Introduces The Use Of Elevator Knowledge


Elevators are used to go upstairs or downstairs to bring people up or down. Below, China Elevator Lifts Factory introduces the rules of using elevators:

1. The elevator is generally at one end of the corridor, the door frame is very deep, and the door is silver-gray stainless steel iron.

2. When there are multiple elevators in the floor, it will be divided into single-story and... see more double-deck elevators. The floor number is posted on the door brow. You can select the elevator according to the floor number you want to go to.

3. On the wall next to the stair door, there is a round button for going up or down, and there is a triangle pointing inside.

4. After pressing one of the buttons, the indicator light inside turns on, indicating that you want to go upstairs or downstairs from the current station position.

5. At this time, stand outside the door and wait for the elevator to come. Be careful not to stand in the door sill of the elevator. The button has the direction and floor of the elevator running.

6. The elevator will open at the door. If you are going in the direction you want to go, you can go in. Pay attention to the first down and then up. People who come out should let them come out first.

7. There is a row of buttons next to the door on the right side of the elevator. After entering, press the floor you want to go to, and then find a place to stand.

8. The top of the button shows the operating status of the elevator on which floor. There are two buttons for opening and closing the door. The elevator will not go if the door is closed.

9. After the door is closed, the elevator starts to move, and when it reaches the floor, it will stop and open. Don't be too anxious if you notice that your floor is going down again.

Through the above introduction, China Passenger Elevator Factory hopes that you can simply refer to the content of this article in future use.
3 days ago 0 likes 0 comments 0 comments
glejin taizhou :
Float Pontoon Factory Introduces The Requirements For The Use Of The Terminal


Float Pontoon Factory introduces the types of yacht piers, which can be divided into aluminum alloy and steel structure yacht piers, barge piers, and combined piers. Barge marina, this type of marina will be heard by very few people. The barge belongs to the rectangular flat-bottomed boat. It has no power plant itself, and it can be said that it can't be talked about sailing. It is often used to fix... see more the ship based on the anchorage in the middle of the river. With the maturity of the barge, there are basically two materials for the barge pier to choose from, concrete structure or rigid structure. It can be used as Temporary docking points can also be used permanently.

In fact, the marina has experienced the era of plastic, concrete, and steel structures. Nowadays, aluminum alloy yacht piers should become the next mainstream. Compared with the traditional yacht piers in the past, this new type of material yacht pier has obvious advantages. Its anti-corrosion ability is very good, and it is very good in transportation and installation. This type of material can be used for a long time in the marina, and it can be said to be prosperous. If the pontoons and panels are aging because of the long use time, then you only need to deal with this Some parts can be replaced by one replacement.

Through the above introduction, China Jet Ski Dock Factory hopes that you can simply refer to the content of this article in future use.

https://www.atboxingsandbag.com/
3 days ago 0 likes 0 comments 0 comments
7 days ago
Mayne Nalyia added new blog post

The Cheap Jordans Retro continues to explore new colourways with the very understated and summery Seafoam colourway.The colors are linked for the Air Jordan 1 High which dropped this morning in the “Light Fusion Red” version that some have called “McDonald
7 days ago 0 likes 0 comments 0 comments
cnshunda yuyao :
Hydraulic Fittings Company Introduces The Details Of The Use Of Hydraulic Hose Fittings

It may be easy for many people to recognize the sealing method used by appearance, but the thread form may not be so easy to confirm. Thread forms are not as easy to identify as sealing methods, because most of them look the same. When people try to identify the thread form, the result can be a time-consuming and laborious process that takes a lot of time. On the other hand, accessories can be easily... see more identified. Hydraulic Fittings Company introduces how to use hydraulic hose fittings.

Hydraulic hose joints can be permanent or reusable. Permanent hydraulic hose joints are often used in the fluid power industry. Due to its ease of use and quick connection, especially compared to reusable joints, this type of hose joint is widely used in the industry. Permanent hydraulic hose couplings can also be considered more reliable than reusable hydraulic hose couplings. The reusable hydraulic hose connector is not permanently connected to the hydraulic hose. The reusable hydraulic hose end does not need to be connected to the hydraulic hose. When using reusable hydraulic hoses, a collar will be placed at the end of the hose. After placing the collar, screw a valve stem into the collar, which will form an even seal.

The hydraulic hose connector can be tightened with a tool, or the hose connector can be tightened by hand. Because many people think that this technology is obsolete, reusable hydraulic hose couplings are no longer used frequently today. People can identify reusable accessories based on how it is installed. Using clamps or wrenches, reusable connectors can be easily installed on hoses. Reusable hydraulic hose joints are generally more expensive than permanent hose joints, and the assembly process is generally longer.

Through the above introduction, Hydraulic Adapters company hopes that you can simply refer to the content of this article in future use.

https://www.silways.com
7 days ago 0 likes 0 comments 0 comments
7 days ago
zdfabric zdfabric added new blog post

As a kind of chemical fiber fabric, 100% polyester fabric is a kind of chemical fiber fabric with a higher usage rate among chemical fiber fabrics. Although polyester fabrics have poor air permeability, they are still widely used in the market due to their
7 days ago 0 likes 0 comments 0 comments
Changshu Dongfang :
Introduce The Raw Materials Of Teddy Velvet Fabric Manufacturer
In recent years, there have been more and more new fabrics on the market, including teddy velvet fabric produced by teddy velvet fabric manufacturer .
The shape of Teddy Fleece is somewhat similar to Teddy Fleece, both in terms of color and structure. Teddy velvet is a kind of material produced from polyester material through slack processing and other methods. Generally, it can be used to make autumn and winter coats,... see more of course, it can also be used to make rag doll toys.
When choosing teddy velvet products on a daily basis, we should try our best to choose products that are more secure than those produced by brands we believe in. Secondly, we must pay attention to the composition of teddy velvet, most of which are made of polyester fiber. To make the fabric more elastic, about 5% to 8% spandex will be mixed during processing. The specific purchase depends on the purpose.
Most of the raw materials for Teddy velvet production are polyester fibers, and the fabric has a high grammage. It is a kind of material produced from polyester materials through slack processing and other methods.
The rabbit fur fabric produced by the rabbit fur fabric manufacturer , like the teddy velvet fabric, is a more popular new fabric, especially popular with girls. www.dfknit.com
8 days ago 0 likes 0 comments 0 comments
8 days ago
wei long :
The Service Life Of China Lead Die Casting
We all know that China lead die casting has been selling well overseas in recent years. In addition to the quality of the product, the type of product and the service life of the product is also very critical.
Generally speaking, the service life of die castings that can be regularly maintained and maintained will definitely be longer, but in addition, the choice of materials is also very important.
Stainless steel lead die casting has... see more a longer service life. The performance of this product can completely replace imported products, and the price is significantly lower than that of imported products, which saves costs for customers. After the stainless steel shot is used, the surface of the casting is smooth and does not rust, and no post-treatment such as pickling is required, which is beneficial to environmental protection. You can choose between pre-polished round cut pellets and non-pre-polished cut pellets, two different shapes of products.
The China lead die casting factory is constantly improving in product quality, material selection, and other aspects, and will become more and more popular with customers. chinaweilong.cn
8 days ago 0 likes 0 comments 0 comments